Revel Kit

    Revel Kit

    Direct Drive Bolt-on Electric Skateboard

    $699.00 SALE: $599.00

    The Revel Kit is a direct drive bolt-on electric skateboard, designed from the ground up for unparalleled versatility, massive performance, and using premium parts and materials. It works with a variety of standard longboard wheels, like ABEC 11 or Orangatang, and it can be installed on most decks with just 4 screws like a standard skateboard truck.

    28mph (45kmh) Top Speed

    10 miles (16km) Range*

    4WD Ready Remote

    * Up to 10 miles (16km) with standard battery. Up to 15 miles (24km) with extended range battery.

    What's in the box: matching front truck, 4 x 90mm standard black wheels, lithium-ion battery, charging adapter, remote control, remote charging cable, skate tool, installation hardware.

    IN STOCK | Ships within 1-2 weeks
    Share: Check out the Revel Bundles!

    Massive Performance

    Powerful 2x1100W Direct Drive Motors

    High Discharge Li-Ion Battery Cells
    The large 1100W motors ensure the Revel Kit has all the torque it needs, and can propel riders weighing up to 264lbs (120kg).

    The algorithm behind our mature electronic speed controller (ESC) has been perfected over the years to provide impressive speeds of up to 28mph (45kmh), phenomenal acceleration and a smooth regenerative braking curve.

    With powerful motors, and a well-curated electronic speed controller, we knew we wanted the best batteries on the market to power the Revel Kit system. The Samsung 18650 lithium-ion battery cells proved to be the right choice, boasting a stable chemistry, a reasonably high capacity and a high discharge rate.

    All these make the Revel Kit an all-around high performance electric skateboard.

    Slide-In Battery Swapping System

    No need to carefully plan your day around the places where you can recharge your battery. A depleted battery can be swapped for a fresh one in seconds, so you can be on your way when you need to cover long distances. And you can carry as many extra batteries as you need.

    To make sure the battery is properly secured and causes as little vibration as possible, we moved away from the traditional click-in battery swapping system in our previous version, to a much more secure slide-in system.

    Premium Quality

    The Revel Kit’s baseplate is made out of aluminum with added manganese, to give it a tensile strength comparable to that of some steels.

    The enclosure is made out of a high-grade polycarbonate compound, in order to provide high impact resistance, and increased durability.

    For the battery case, we went with a fibreglass reinforced ABS material capable of handling temperatures as high as 176°F (80°C).

    The direct drive truck assembly is built with an ultra-durable steel axle that has been tested to withstand forces up to 692 lbs (314kg).

    The Revel Kit works with a variety of standard longboard wheels, like ABEC 11 or Orangatang, and it can be mounted on most decks, with just 4 screws like a standard skateboard truck.

    Compatible Wheels

    Orangatang Caguama 85mm
    Abec 11 Flywheels / Refly 90mm
    Revel Standard 90mm
    (included with Revel Kit)
    Abec 11 Flywheels / Refly 97mm
    Boa Constrictor 100mm
    Abec 11 Superfly 107mm

    Compatible Decks


    Top Speed: 28 Mph / 45kmh
    Standard Range Battery: 6-10 Miles / 10-16 Km
    Ext. Range Battery: 10-15 Miles / 16-24 Km
    Max Grade: 15º
    Charge Time: 120-180 Minutes
    Drive Weight: 11 Lbs / 5 Kg
    Wheels: 90mm Diameter
    Throttle Control: Linear
    Max Rider Capacity: Tested to 264 Lbs / 120 Kg
    Motors: 1100W Dual Brushless Motors
    IP Rating: Water & Dust Resistant (IP 54)
    Braking: Electronic Regenerative Braking
    Remote Connection: Bluetooth Low-Energy
    Battery Options: 159Wh 4.4Ah / 216Wh 6Ah
    Operating Temp.: 5 to 120 °F / -15 to 49 °C
    Versatile Direct Drive Motors
    The direct drive system requires very little maintenance and provides superior heat dissipation which results in better performance and increased durability. And since there are no belts, the drag is minimal, allowing for an effortless freewheel just like hub motors.
    User-Friendly Remote Control
    The throttle can be engaged forward to accelerate and pulled back for braking. Linear throttle means less thumb slips, and the remote is easy to use with gloves too. A reverse mode, 4 speed modes, 3 braking modes, and a screen displaying ride information, complete the functions of the remote control.
    Four-Wheel Drive Capability
    The remote is designed to support two simultaneous connections allowing for two Revel Kits to be mounted on one board, for a four-wheel drive experience. Make sure to check out the Revel Bundles, if you are interested in experiencing the power and torque of a 4WD system!
    Customizable Braking Power
    Depending on weight, different riders need different braking power. It's also a matter of preference as some riders enjoy stronger brakes while others prefer a softer stop. So we've added a setting to the remote, where you can set braking power to Low, Medium or High.
    Weather Resistant
    The motors and electronics are water resistant (IP54 Rating) so you can safely ride through puddles without worrying about ruining your Revel Kit. Heavy rain or submerging are definitely not recommended!
    Travel Friendly Battery
    According to the US Federal Aviation Administration and the International Air Transport Association, our 159Wh standard battery is suitable for travel with airline approval.
    Quiet Ride
    Unlike most other electric skateboards out there, our brushless motor controller features an optimized Field Oriented Control (FOC) implementation that is able to deliver a quiet and stealthy ride.
    USB Charging Port
    The Revel battery comes equipped with a USB port that can be used to charge the Revel remote, your phone, or any battery-powered wearables.